The Largest Motorcycle Gear Retailer In The Pacific Northwest!
Brand: Icon

Alliance GT Rubatone

$200.00

Available Options:

SIZE:



Yes it’s back, the midnight creature we call Alliance Dark, this time equipped with a DropshieldTM for easy getaways. Imagine how jealous your friends will be when they see you drop the shield and transform into a super hero from the future. Well we can’t guarantee the hero part, but at least you’ll look good trying.

WORLD STANDARD
Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.

SHIELD
Includes RST Gold Internal DropShield™ and Clear quick-change Fog-Free Proshield™ with Prolock™ shield locking system.

LINER
Sublimated Hydradry™ moisture wicking liner.

SHELL
Injection molded polycarbonate shell for strength and durability

FIT
INTERMEDIATE OVAL
The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side.

VENTING
GOOD
5 air intakes and 5 exhaust ports combined with strategically placed channeling in the interior energy absorbing EPS foam forces air into the helmet at low and high speeds.

WEIGHT
AVERAGE
A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style.

CARE INSTRUCTIONS
Let’s face it, Icon® helmets look cool and you want to keep them that way. We’ve found the following methods work really well to keep our helmets looking sharp and ready to roll. Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; it’s like using brake cleaner to polish your plastics—don’t do it!

Interior Cleaning
1. Remove interior lining as shown on page 10 of the User Manual.
2. Soak your interior in a mild solution of baby shampoo.
3. Rinse in clean water several times until all soap is gone.
4. Let interior air dry and replace accordingly.
* Never machine wash or dry your helmet interior.

Shield Cleaning
Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage
It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight.

Exterior Cleaning (Gloss Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs. (Don't skip this step!)
2. Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts.
3. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots.
* Never machine wash or dry your helmet interior.

Exterior Cleaning (Rubatone Helmets)
1. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs.
2.Remove the now softened bugs and road grime with a light blotting action. For this use the soft part of your helmet bag provided or a clean microfiber cloth.
* Never rub aggressively with anything on the Rubatone™ or you can ruin the finish.

Maintenance
1. For gloss helmet finishes, use spray automotive wax that is specifically designed for cars with a clear coat. (Available at any automotive store.
2. For matte finishes, you know better than to polish a matte finish don’t you?

Advisory O
ne Impact Rule - Any helmet that has sustained an impact should be replaced. Helmets are designed to absorb only one impact. The helmet is designed to absorb some shock by partial destruction of the shell and liner. After your helmet has endured any impact, the impact absorption liner portion of your helmet will have dispersed the energy from that impact, thus rendering the liner compacted and, therefore, compromised. This damage may not be visible. Even if there is no VISIBLE damage to the shell, the helmet’s usefulness is expired after one impact. A helmet that has experienced an impact should be destroyed and replaced, even if it is apparently undamaged. Obsolesence and Helmet Disposal - A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear, e.g. change of fit, cracks, rust, fraying or other signs of normal “wear and tear” that can contribute to helmet degradation.

EXTERIOR
ALLIANCE GT HELMET
The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The main ingredient is the Supervent system featuring oversized intake ports controlled by individual vent triggers along with recessed supervents to reduce wind noise.

SHIELD
ALLIANCE GT HELMET
The Alliance GT’s has not one, but two shields. The quick-change fog-free Proshield keeps the bugs in check while the internal interchangeable drop shield stands on guard for sudden sun encounters. Just flip the switch, drop the shield, and dump the clutch.

INTERIOR
ALLIANCE GT HELMET
The removable sweat wicking Hydradry liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry liner to effectively reduce heat build up.

ICON DROPSHIELD™
DESIGNED TO FIT ALLIANCE GT HELMETS
Instead of carrying extra ProShield™ for changing light conditions, with the flip of a switch, engage the tinted DropShield hidden within the helmet.

ICON PROSHIELD™
DESIGNED TO FIT ALLIANCE AND ALLIANCE GT HELMETS
The Icon Proshield™ (IC-02) is fitted with a helmet shield lock to keep your shield securely closed. Sideplates (Sold Separately) mount to each side of the Proshield for a more custom, finished look. The Proshield™ is designed to fit the Airframe and Alliance Helmets.

Extra Small


To find your best fit, please view our sizing charts.


Eagle Leather offers FREE UPS GROUND shipping in the contiguous 48 state on order over $69.00, but we also offer USPS and FedEx shipping services. Actual shipping charges will be calculated during checkout, but you can use the following links to pick the best service for you.

Eagle Leather Shipping FAQ’s

Please use 98499 for the Origin Zip Code for the most accurate
estimates in time and price.
USPS Delivery Map
USPS Rate Calculator

UPS Ground Map
UPS Rate Calculator

FedEx Maps
FedEx Rate Calculator


Customer Reviews

This product has not yet been reviewed.

Write a Review

Please login or register to write a review for this product.




Eagle Leather offers a 1 YEAR WARRANTY on all items, and a 2 YEAR WARRANTY for all Eagle Leather Branded items. Our warranties covers all workmanship and manufacturer defects, but does not cover normal wear and tear. Find manufacturer warranties here.



Share:  
       
Trustpilot
product